iNFiNiT! Family Operation Manual
Revision D 10-15 Colors & Palettes
Figure 10-9. Subpalette Spectrum
[ ] 4. Press I to highlight the Spectrum position the
cursor is on. If the color stored at that position
is used anywhere within the character, that
area(s) on the character becomes highlighted.
If the color at that position is not used in the
character, press
SHIFT CHAR + Ì or Í to
move to another color position. Repeat this
procedure until a highlighted area(s) appears
on the character.
To change this color, proceed to Step 5.
Otherwise, repeat the above procedure until
you find a color you want to change.
[ ] 5. There are three methods that can be used to
select a color:
• With the cursor on a color position on the
Spectrum, adjust HSI or RGB levels as
desired. Use the cursor keys; or press the
right button to transfer the mouse cursor to
the Edit Monitor, then use the left button to
adjust the settings.
• A color can be picked up from the charac-
ter or object. Click the mouse on an area of
the character. The color at that location
appears in the color box.
• A color can be picked up from another
position on the Spectrum. Move the Spec-
trum cursor to the desired color position.
Press
COLOR FONT. The color at that
Position 3 Position 31
To Next Page
Loading...