CHYRON Corporation
Advanced Read FX 15-14 Revision D
Vertical Split Wipe:
The new image overwrites
the old image from the center of the screen and
expands simultaneously towards the top and
bottom edges of the screen (
Reverse: Off).
OR...
The new image overwrites the old image
simultaneously from the top and bottom edges of
the screen and wipes towards the center of the
screen (
Reverse: On).
Box Wipe:
The new image overwrites the old
image from the center of the screen and expands
outward simultaneously towards all four edges of
the screen (
Reverse: Off).
OR...
The new image overwrites the old image
simultaneously from all four edges of the screen
and wipes towards the center of the screen
(
Reverse: On).
Row Slide/Wipe:
Allows each of up to 24 new
rows to independently overwrite each row from
the bottom (
Up), top (Down), Left, or Right. A
row can also be
Fixed. When the Pattern is
executed, the
Fixed row remains on screen until
the transition is complete, then the
Fixed row is
instantly replaced by the new text row. These
specifications are set in the Row Menu (§15.4).
Transition Pattern
F can use all Row Menu
settings, but the following restriction applies
when executing a
Wipe:
• Transition Pattern
F can only use Left or
Right at one time when executing a Wipe.
If Left and Right are designated in the Row
menu at the same time,
ROWS CANNOT
BE WIPED BOTH LEFT AND RIGHT
appears on the Prompt Line
.
D
E
F
To Next Page
Loading...