iNFiNiT! Family Operation Manual
Revision D 15-15 Advanced Read FX
Up, Down or Fixed can be mixed in the Row
Menu with
Left or Right.
The
Reverse: Off/On field is not used for this
effect.
Scanline Wipe:
This effect breaks up the old
image by scanline to display the new image. All
rows change simultaneously. The direction of
the scanline breakup in each row can be set in the
Row Menu. If
Left, Right, or Fixed are selected,
PLEASE SPECIFY UP OR DOWN FOR ROWS
appears on the Prompt Line, and the Pattern does
not execute. The
Reverse: Off/On field is not
used for this effect.
Row-by-Row Scanline Wipe:
This effect
breaks up the old image by scanline, one row at a
time. The direction of the scanline breakup in
each row can be set in the Row Menu. Only
Up
or Down can be selected. If Left, Right, or
Fixed are selected, PLEASE SPECIFY UP OR
DOWN FOR ROWS
appears on the Prompt Line,
and the Pattern does not execute. The
Reverse:
Off/On
field is not used for this effect.
Transition Pattern
H executes row-by-row. The
Speed setting applies to each non-Fixed row, not
the entire effect. For example, a four row
message containing one fixed row, at a
Speed
setting of 300 takes 900 fields (15 seconds NTSC
or PAL-M; 18 seconds PAL) to execute. All
other Transition Patterns, excluding
J, take 300
fields (5 seconds NTSC or PAL-M; 6 seconds
PAL) to execute.
Screen Scanline Wipe:
This effect breaks up
the old image by scanline to display the new
image. The scanline breakup progresses from
the top of the screen to the bottom (
Reverse:
G
H
I
To Next Page
Loading...