CHYRON Corporation
Advanced Read FX 15-32 Revision D
When CNTL ALT READ is executed to read a message
into the Background of an EEFB or CCFB:
• If the Background Output Percentage level in Read
Effects is set to
0 or 100, the image is displayed at
100%.
• If the Background Percentage level in Read Effects is
set to any other level, the image is displayed at the
specified level.
To erase the Background buffer:
• Press
CNTL ALT ERASE.
To erase both the Foreground and Background buffers:
• Press
ESC.
To simultaneously erase all available Standard frame
buffers, or the Foreground buffers of all available
Extended Effects Frame Buffers:
• Press
CNTL ALT 4.
To restore the erased images after pressing
CNTL ALT 4:
• Press
BUILD.
NOTE
Although an RGB(A) graphic can be
read into the Foreground buffer, it
cannot be recorded unless it has
been converted to a Machine Font
character, or saved as an RGB
message.
5
5. See Footnote 4 on page 15-28.
To Next Page
Loading...