CHYRON Corporation
Advanced Read FX 15-48 Revision D
NOTE
You cannot record RGB(A) graphics
images into the text buffer unless
the they have been converted to
Machine Font characters.
6
Text can be recorded in both
buffers. However, when text is
recorded in the graphics frame
buffer by using Text & Graphics
record (Step 6 - CNTL RCD G), it
becomes part of the RGB(A) image,
and cannot be edited using
Message Compose text editing
functions.
[ ] 4. Change the active frame buffer back to the one
that is assigned to CHANNEL A.
NOTE
If the active frame buffer is not
changed back to the one that was
assigned to CHANNEL A before
executing Record, the message will
not be recorded properly.
[ ] 5. Press CLR, then enter an empty ID number
using the Address Keypad.
[ ] 6. Press
CNTL RCD G.
Information on this function can also be found
in §8.5.15.
NOTE
Output Percentage level settings
that were recorded in either the
Read Effects main menu or in Mix
Effects Mix Settings window
6. See Footnote 4 on page 15-28.
To Next Page
Loading...