iNFiNiT! Family Operation Manual
Revision D 15-49 Advanced Read FX
(§16.5.5) will not be recorded. The
message will read back using the
current settings.
It is possible to enter Text & Graphics into the buffer that
will hold the graphics, and to enter additional text into
the buffer that will hold the text:
[ ] 1. Set CHANNEL assignments in the Mix menu,
(§16.7) so that one frame buffer is in
CHANNEL A, and a separate one is in
CHANNEL B.
[ ] 2. Read text into the frame buffer that is assigned
to CHANNEL A (the topmost CHANNEL).
[ ] 3. Read text into the frame buffer that is assigned
to CHANNEL B, then read graphics into the
same buffer.
NOTE
The graphics cannot be full screen,
as they will cover up the text that is
read into the same buffer.
[ ] 4. Change the active frame buffer back to the one
that is assigned to CHANNEL A.
[ ] 5. Press
CLR, then enter an empty ID number
using the Address Keypad.
[ ] 6. Press
CNTL RCD G.
NOTE
When text is recorded in the
graphics frame buffer using Text &
Graphics record (CNTL RCD G), it
becomes part of the RGB(A) image,
and cannot be edited using
Message Compose text editing
functions.
To Next Page
Loading...