CHYRON Corporation
Advanced Read FX 15-52 Revision D
[ ] 3. Read text into the Background, then read
graphics into the Background.
NOTE
The graphics cannot be full screen,
as they will cover up the text that is
read into the same buffer.
[ ] 4. Set Output Percentage levels for the
Foreground and Background.
[ ] 5. Press
Q, CNTL Q, ESC or select Quit to exit
the Read Effects main menu and return to the
Message Compose main menu.
If the system is equipped with Extended
Effects Frame Buffers (EEFB’s), it is
preferable not to press
ESC to exit the Read
Effects main menu. If you happen to press
ESC again immediately after exiting the menu,
the system can lock up, and it will be necessary
to reboot.
[ ] 6. Press
CLR, then enter an empty ID number
using the Address Keypad.
[ ] 7. Press
CNTL RCD G.
NOTE
When text is recorded in the
Background using Text & Graphics
record, it becomes part of the
RGB(A) image, and cannot be
edited using Message Compose
text editing functions.
To Next Page
Loading...