Chyron infinit! series - Page 664

CHYRON Corporation
Mix Effects 16-12 Revision D
To assign a buffer to CHANNEL A, B or PREVIEW:
• Use the mouse to select (highlight) the buffer in the
desired CHANNEL or PREVIEW row.
OR...
[ ] 1. Cursor to the buffer you want to assign to the
CHANNEL or PREVIEW.
[ ] 2. Press
SPACE BAR or 
.
Repeat for any other assignments.
To turn off a buffer assignment:
• Use the mouse to deselect the buffer.
OR...
[ ] 1. Cursor to the buffer you want turn off.
[ ] 2. Press
SPACE BAR or  .
To set an Output Percentage level, cursor to the slider you
want to adjust, then choose one of the following three
ways to adjust a slider:
• Press
CLR. Enter a value between 0 and 100 using
the Address Keypad, then press

.
• Press
SHIFT CHAR ÌÍ as needed to reach the
desired Output Percentage level.
• Use the mouse to drag the Percent slider to the
desired Output Percentage level.
To exit the Mix Effects main menu:
• Press
MIX, Q, CNTL Q or select Quit.
The new settings are reflected in the
Buffer: field of the
Message Compose main menu. Press
CHNG to cycle
through the active buffers to confirm your new settings.