iNFiNiT! Family Operation Manual
Revision D 6-19 Message Compose Basics
For example, to limit the search to all fonts of Font Size 50:
• Press
CLR, then enter 50 in the Size: field using the
Address Keypad.
You can attach the asterisk to a value in any field as well.
For example, to list all font names beginning with
P:
•Enter
P* in the Name: field using the Address Keypad.
Note that entries in the fields can be upper or lower case.
A range can also be specified in a field, using "
-" to sep-
arate the values. For example, to list all fonts from
1000
to
1999:
•Enter
1000-1999 in the ID: field using the Address
Keypad.
A range can also be used with characters. To list all fonts
beginning with the letters
A through G:
•Enter
A-G* in the Name: field.
To select
List or Quit:
• Select the icon using the mouse, or highlight either
icon, then press
L to select List, or Q to select Quit.
To execute
List:
• Select
List as described above or press CNTL. The
new parameters are saved until
List is executed
again, or Message Compose is exited. Note that
although the settings are saved, the selective list itself
is not. Simply re-execute
List to regenerate the
selective list.
To exit without saving changes:
• Select
Quit as described above or press ESC.
To Next Page
Loading...