Table 55 on page 955 shows the forwarding class and PLP that are assigned to the IP
precedence bits when you apply the default IP precedence classifier.
Table 55: Default IP Precedence (ipprec-default) Classifier
PLPForwarding ClassIP Precedence Bits
lowbest-effort000
lowassured-forwarding001
lowbest-effort010
lowbest-effort011
lowbest-effort100
lowexpedited-forwarding101
lownetwork-control110
highnetwork-control111
Related
Documentation
Applying Behavior Aggregate Classifiers to Logical Interfaces•
Default MPLS EXP Classifier
Table 56 on page 955 shows the forwarding class and PLP that are assigned to the MPLS
EXP bits when you apply the explicit default MPLS EXP classifier. To do this, include the
default statement [edit class-of-service system-defaults classifier exp default].
Table 56: Default MPLS Classifier
Loss PriorityForwarding ClassCode Point
lowbest-effort000
highbest-effort001
lowexpedited-forwarding010
highexpedited-forwarding011
lowassured-forwarding100
highassured-forwarding101
lownetwork-control110
955Copyright © 2017, Juniper Networks, Inc.
Chapter 28: Configuring Behavior Aggregate Classifiers
To Next Page
Loading...
Need help?
General
