forwarding-table
Syntax forwarding-table {
chained-composite-next-hop;
export [ policy-name ];
(indirect-next-hop | no-indirect-next-hop);
(indirect-next-hop-change-acknowledgements |
no-indirect-next-hop-change-acknowledgements;)
krt-nexthop-ack-timeout interval;
unicast-reverse-path (active-paths | feasible-paths);
}
Hierarchy Level [edit logical-systems logical-system-name routing-options],
[edit routing-options]
Release Information Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Statement introduced in Junos OS Release 14.1X53-D30 for the QFX Series.
Description Configure information about the routing device’s forwarding table.
The remaining statements are explained separately. See CLI Explorer.
Required Privilege
Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related
Documentation
• Example: Load Balancing BGP Traffic
Copyright © 2017, Juniper Networks, Inc.1530
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
Need help?
General
