show route brief
List of Syntax Syntax on page 2989
Syntax (EX Series Switches) on page 2989
Syntax show route brief
<destination-prefix>
<logical-system (all | logical-system-name)>
Syntax (EX Series
Switches)
show route brief
<destination-prefix>
Release Information Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Description Display brief information about the active entries in the routing tables.
Options none—Display all active entries in the routing table.
destination-prefix—(Optional) Display active entries for the specified address or range
of addresses.
logical-system (all | logical-system-name)—(Optional) Perform this operation on all
logical systems or on a particular logical system.
Required Privilege
Level
view
Related
Documentation
show route all on page 2982•
• show route best on page 2986
List of Sample Output show route brief on page 2989
Output Fields For information about output fields, see the Output Field table of the show route
command.
Sample Output
show route brief
user@host> show route brief
inet.0: 10 destinations, 10 routes (9 active, 0 holddown, 1 hidden)
+ = Active Route, - = Last Active, * = Both
0.0.0.0/0 *[Static/5] 1w5d 20:30:29
Discard
10.255.245.51/32 *[Direct/0] 2w4d 13:11:14
> via lo0.0
2989Copyright © 2017, Juniper Networks, Inc.
Chapter 42: Operational Commands
To Next Page
Loading...
Need help?
General
