show oam ethernet connectivity-fault-management sla-iterator-statistics
Syntax show oam ethernet connectivity-fault-management sla-iterator-statistics
maintenance-domain md-name
maintenance-association ma-name
sla-iterator sla-iterator
<local-mep local-mep-id>
<remote-mep remote-mep-id>
Release Information Command introduced in Junos OS Release 11.4 for EX Series switches.
Command introduced in Junos OS Release 9.6.
Command introduced in Junos OS Release 12.2 for ACX Series routers.
Command introduced in Junos OS Release 13.2 for MX Series routers (not on MPC3E
Hyperion cards).
Description Display the Ethernet Operation, Administration, and Maintenance (OAM) service-level
agreement (SLA) iterator statistics.
Options maintenance-domain md-name—Name of an existing connectivity fault management
(CFM) maintenance domain.
maintenance-association ma-name—Name of an existing CFM maintenance association.
sla-iterator sla-iterator— Name of the iterator profile.
local-mep local-mep-id—(Optional) Numeric identifier of the local MEP. The range of
values is 1 through 8191.
remote-mep remote-mep-id—(Optional) Numeric identifier of the remote MEP. The range
of values is 1 through 8192.
Required Privilege
Level
view
Related
Documentation
Configuring an Iterator Profile on a Switch (CLI Procedure)•
• clear oam ethernetconnectivity-fault-management sla-iterator-statistics on page 1787
List of Sample Output show oam ethernet connectivity-fault-managementsla-iterator-statistics on page 2805
showoam ethernet connectivity-fault-managementsla-iterator-statistics(MX Series
routers) on page 2805
Output Fields Table 181 on page 2803 lists the output fields for the show oam ethernet
connectivity-fault-management sla-iterator-statistics command. Output fields are listed
in the approximate order in which they appear.
Copyright © 2017, Juniper Networks, Inc.2802
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
Need help?
General
