Juniper ACX2000

•
RFC 2597, Assured Forwarding PHB Group
•
RFC 3246, An Expedited Forwarding PHB (Per-Hop Behavior)
•
RFC 4291, IP Version 6 Addressing Architecture
•
RFC 4443, Internet Control Message Protocol (ICMPv6) for the Internet Protocol Version
6 (IPv6) Specification
NOTE: ACX Series routers do not support RFC 2460, RFC 4291, and RFC 4443
standards.
Related
Documentation
Firewall Filters Overview•
• Service Filter Overview
• Simple Filter Overview
• Firewall Filters in Logical Systems Overview
Guidelines for Configuring Firewall Filters
This topic covers the following information:
•
Statement Hierarchy for Configuring Firewall Filters on page 1044
•
Firewall Filter Protocol Families on page 1045
•
Firewall Filter Names and Options on page 1046
•
Firewall Filter Terms on page 1046
•
Firewall Filter Match Conditions on page 1046
•
Firewall Filter Actions on page 1048
Statement Hierarchy for Configuring Firewall Filters
To configure a standard firewall filter, you can include the following statements. For an
IPv4 standard firewall filter, the family inet statement is optional. For an IPv6 standard
firewall filter, the family inet6 statement is mandatory.
firewall {
family family-name {
filter filter-name {
accounting-profile name;
instance-shared;
interface-specific;
physical-interface-filter;
term term-name {
filter filter-name;
}
term term-name {
from {
match-conditions;
ip-version ip-version {
Copyright © 2017, Juniper Networks, Inc.1044
ACX Series Universal Access Router Configuration Guide