To Next Page

To Previous Page

show (ospf | ospf3) log

List of Syntax Syntax on page 2842

Syntax (EX Series Switch and QFX Series) on page 2842

Syntax show (ospf | osfp3) log

<logical-system (all | logical-system-name)>

Syntax (EX Series

Switch and QFX

Series)

show (ospf | osfp3) log

Release Information Command introduced before Junos OS Release 7.4.

Command introduced in Junos OS Release 9.0 for EX Series switches.

topology option introduced in Junos OS Release 9.0.

topology option introduced in Junos OS Release 9.0 for EX Series switches.

realm option introduced in Junos OS Release 9.2.

Command introduced in Junos OS Release 11.3 for the QFX Series.

Command introduced in Junos OS Release 14.1X53-D20 for the OCX Series.

Description Display the entries in the Open Shortest Path First (OSPF) log of SPF calculations.

Options none—Display entries in the OSPF log of SPF calculations for all routing instances.

instance instance-name—(Optional) Display entries for the specified routing instance.

logical-system (all | logical-system-name)—(Optional) Perform this operation on all

logical systems or on a particular logical system.

topology topology-name—(Optional) (OSPFv2 only) Display entries for the specified

topology.

realm (ipv4-multicast | ipv4-unicast | ipv6-multicast)—(OSPFv3 only) (Optional)

Display entries for the specified OSPFv3 realm, or address family. Use the realm

option to specify an address family for OSPFv3 other than IPv6 unicast, which is the

default.

Required Privilege

Level

view

List of Sample Output show ospf log on page 2843

show ospf log topology voice on page 2843

Output Fields Table 188 on page 2843 lists the output fields for the show (ospf | ospf3) log command.

Output fields are listed in the approximate order in which they appear.

ACX Series Universal Access Router Configuration Guide

Juniper ACX2000 Configuration Guide

Other manuals for Juniper ACX2000