Juniper ACX2000 Configuration Guide

CHAPTER 11
Configuring DHCP and DHCPv6 Relay
Agent
•
DHCP Relay Agent on ACX Series Routers on page 368
•
DHCPv6 Relay Agent on ACX Series Routers on page 370
•
Inserting the DHCPv6 Interface Identifier into DHCPv6 Packets on page 371
•
Configuring Group-Specific DHCP Relay Options on page 372
•
Overriding the Default DHCP Relay Configuration Settings on page 373
•
Changing the Gateway IP Address (giaddr) Field to the giaddr of the DHCP Relay
Agent on page 376
•
Replacing the DHCP Relay Request and Release Packet Source Address on page 376
•
Overriding Option 82 Information on page 377
•
Using Layer 2 Unicast Transmission for DHCP Packets on page 377
•
Trusting Option 82 Information on page 378
•
Specifying the Maximum Number of DHCP Clients Per Interface on page 378
•
Automatically Logging Out DHCP Clients on page 380
•
Sending Release Messages When Clients Are Deleted on page 381
•
Disabling Automatic Binding of Stray DHCP Requests on page 381
•
Using DHCP Relay Agent Option 82 Information on page 383
•
Using DHCP Option Information to Selectively Process DHCP Client Traffic on page 390
•
Understanding DHCP Option 82 for Protecting Switching Devices Against
Attacks on page 392
•
Configuring DHCP Option 82 to Help Protect the Switching Devices Against Attacks
(CLI Procedure) on page 396
•
Configuring Named Server Groups on page 398
•
Configuring Active Server Groups to Apply a Common DHCP Relay Agent Configuration
to Named Server Groups on page 398
•
Disabling DHCP Relay on page 399
367Copyright © 2017, Juniper Networks, Inc.

Juniper ACX2000 Specifications

General

Brand	Juniper
Model	ACX2000
Category	Network Router
Language	English