show protection-group ethernet-ring interface
Syntax show protection-group ethernet-ring interface
Release Information Command introduced in Junos OS Release 9.4.
Command introduced in Junos OS Release 12.3X54 for ACX Series routers.
Description Displays the status of the Automatic Protection Switching (APS) interfaces on an Ethernet
ring.
Options This command has no options.
Required Privilege
Level
view
Related
Documentation
show protection-group ethernet-ring data-channel•
• show protection-group ethernet-ring aps on page 2916
• show protection-group ethernet-ring node-state on page 2923
• show protection-group ethernet-ring statistics on page 2927
• show protection-group ethernet-ring vlan on page 2932
List of Sample Output show protection-group ethernet-ring interface (EX Series Switch Owner
Node) on page 2921
show protection-group ethernet-ring interface (Owner Node MX Series Router
) on page 2921
show protection-group ethernet-ring interface detail (Owner Node MX Series Router
) on page 2921
showprotection-groupethernet-ringinterface(EX Series Switch Ring Node) on page2922
show protection-group ethernet-ring interface detail (ACX Series and MX
Series) on page 2922
Output Fields Table 203 on page 2920 lists the output fields for both the EX Series switch, and the ACX
Series and MX Series router show protection-group ethernet-ring interface commands.
Output fields are listed in the approximate order in which they appear.
Table 203: MX Series Routers show protection-group ethernet-ring
interface Output Fields
Field DescriptionField Name
Output is organized by configured protection group.Ethernet ring port parameters for
protection group group-name
Physical interfaces configured for the Ethernet ring. This can
be an aggregated Ethernet link also.
Interface
Copyright © 2017, Juniper Networks, Inc.2920
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
Need help?
General
