clear oam ethernet connectivity-fault-management synthetic-loss-measurement
Syntax clear oam ethernet connectivity-fault-management synthetic-loss-measurement
maintenance-domain md-name
maintenance-association ma-name
<local-mep local-mep-id>
<remote-mep remote-mep-id>
Release Information Command introduced in Junos OS Release 13.2 for MX Series routers.
Description (MX Series routers)—For all routers that support IEEE 802.1ag OAM connectivity fault
management (CFM), clear the existing on-demand Ethernet synthetic loss measurement
(ETH-SLM) statistics and restart counting the ETH-SLM frame counts and statistics.
Options maintenance-domain md-name—Name of an existing CFM maintenance domain.
maintenance-association ma-name—Name of an existing CFM maintenance association.
local-mep local-mep-id—(Optional) Clear connectivity fault management information
for the specified local MEP only.
remote-mep remote-mep-id—(Optional) Clear connectivity fault management information
for the specified remote MEP only.
Required Privilege
Level
view
Related
Documentation
monitor ethernet synthetic-loss-measurement on page 1796•
• show oam ethernet connectivity-fault-management synthetic-loss-statistics on
page 2807
List of Sample Output clear oam ethernet connectivity-fault-management
synthetic-loss-measurement on page 1788
Output Fields When you enter this command, you are provided feedback on the status of your request.
Sample Output
clear oam ethernet connectivity-fault-
management synthetic-loss-
measurement
user@host> clear oam ethernet connectivity-fault-management synthetic-loss-measurement
maintenance-domain md5 maintenance-association ma5 local-mep 100 remote-mep 102
Synthetic loss measurement restarted.
Copyright © 2017, Juniper Networks, Inc.1788
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
Need help?
General
