• Requesting DHCP Local Server to Initiate Reconfiguration of Client Bindings on page 347
Requesting DHCP Local Server to Initiate Reconfiguration of Client Bindings
You can request that the DHCP local server initiate reconfiguration of all of clients or only
specified clients.
To request reconfiguration of all clients:
•
Specify the all option.
user@host> request dhcp server reconfigure all
You can use any of the following methods to request reconfiguration of specific clients:
•
Specify the IP address of the DHCP client.
user@host> request dhcp server reconfigure 192.168.27.3
•
Specify the MAC address of a DHCPv4 client.
user@host> request dhcp server reconfigure 12:23:34:45:56:67
•
Specify an interface; reconfiguration is attempted for all clients on this interface.
user@host> request dhcp server reconfigure interface ge-0/0/0.100
•
Specify a routing instance; reconfiguration is attempted for all clients or the specified
clients in this routing instance.
user@host> request dhcp server reconfigure all routing-instance ri-boston
Related
Documentation
Configuring the Router to Maintain DHCP Subscribers During Interface Delete Events
on page 338
•
• Understanding Dynamic Reconfiguration of Extended DHCP Local Server Clients on
page 341
• Configuring Dynamic Reconfiguration of DHCP Clients to Avoid Extended Outages Due
to Server Configuration Changes on page 344
• Configuring Dynamic Reconfiguration Attempts for DHCP Clients on page 345
• Configuring Deletion of the Client When Dynamic Reconfiguration Fails on page 346
347Copyright © 2017, Juniper Networks, Inc.
Chapter 10: Configuring DHCP Client and DHCP Server
To Next Page
Loading...
Need help?
General
