destination-udp-port (RFC 2544 Benchmarking)
Syntax destination-udp-port port-number;
Hierarchy Level [edit services rpm rfc2544-benchmarkingtests test-name test-name]
Release Information Statement introduced in Junos OS Release 12.3X54 for ACX Series routers.
Description Specify the UDP port of the destination to be used in the UDP header for the generated
frames. If you do not specify the UDP port, the default value of 4041 is used. This
parameter is optional for a bridge family.
Options port-number—UDP port number for the test frames
Default: 4041
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
• RFC 2544-Based Benchmarking Tests Overview on page 1335
• Configuring RFC 2544-Based Benchmarking Tests on page 1341
• rfc2544-benchmarking on page 1698
1483Copyright © 2017, Juniper Networks, Inc.
Chapter 41: Configuration Statements
To Next Page
Loading...
Need help?
General
