Juniper ACX2000

e1-options (BITS Interfaces Signal Type)
Syntax e1-options {
framing (g704 | g704-no-cro4);
}
Hierarchy Level [edit chassis synchronization interfaces bits signal-type]
Release Information Statement introduced in Junos OS Release 12.3 for ACX Series Routers.
Description Specify options for the E1 signal type for the building-integrated timing supply (BITS)
interface. Valid only if e1 is the signal-type configured at the [edit chassis synchronization
source interfaces interface-name bits signal-type].
Options The remaining statements are explained separately. See CLI Explorer.
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
• External Clock Synchronization Overview for ACX Series Routers on page 226
• Configuring External Clock Synchronization for ACX Series Routers on page 228
• Synchronous Ethernet Overview
• show chassis synchronization on page 2386
Copyright © 2017, Juniper Networks, Inc.1504
ACX Series Universal Access Router Configuration Guide