Juniper ACX2000 Configuration Guide

relay (Chassis Alarm)
Syntax relay
input {
port port-number {
mode (close | open);
trigger (ignore | red | yellow);
}
}
output{
port port-number {
input-relay input-relay;
mode (close | open);
temperature;
}
}
Hierarchy Level [edit chassis alarm]
Release Information Statement introduced in Junos OS Release 12.3.
Description Configure input and output relay alarms.
The remaining statements are explained separately. See CLI Explorer.
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
• User-Defined Alarm Relay Overview on page 158
• show chassis craft-interface on page 1865
• show chassis alarms on page 1845
1693Copyright © 2017, Juniper Networks, Inc.
Chapter 41: Configuration Statements

Juniper ACX2000 Specifications

General

Brand	Juniper
Model	ACX2000
Category	Network Router
Language	English