show validation database
Syntax show validation database
<brief | detail>
<instance instance-name>
<logical-system logical-system-name>
<mismatch>
<origin-autonomous-system as-number>
<record ip-prefix>
<session ip-address>
Release Information Command introduced in Junos OS Release 12.2.
Description Display information about the route validation database when resource public key
infrastructure (RPKI) BGP route validation is configured. You can query all route validation
records that match a given prefix or origin-autonomous-system. In addition, you can filter
the output by a specific RPKI cache session.
Options none—Display all route validation database entries.
brief | detail—(Optional) Display the specified level of output.
instance instance-name—(Optional) Display information about route validation database
entries for the specified routing instance. The instance name can be master for the
main instance, or any valid configured instance name or its prefix.
logical-system logical-system-name—(Optional) Perform this operation on a particular
logical system.
mismatch—(Optional) Filter the output by mismatched origin autonomous systems.
origin-autonomous-system as-number—(Optional) Filter the output by mismatched
origin autonomous systems. The mismatch qualifier is useful for finding conflicting
origin-autonomous-system information between RPKI caches. Mismatches might
occur during cache reconfiguration.
record ip-prefix—(Optional) Filter the output by route validation records that match a
given prefix.
session ip-address—(Optional) Filter the output by a specific RPKI cache session.
Required Privilege
Level
view
Related
Documentation
Use Case and Benefit of Origin Validation•
• Understanding Origin Validation for BGP
• Example: Configuring Origin Validation for BGP
Copyright © 2017, Juniper Networks, Inc.3182
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
Need help?
General
