direction (RFC 2544 Benchmarking)
Syntax direction (egress | ingress);
Hierarchy Level [edit services rpm rfc2544-benchmarkingtests test-name test-name]
Release Information Statement introduced in Junos OS Release 12.3X53 for ACX Series routers.
Description Specify the direction of the interface on which the test must be run. RFC 2544 tests are
supported only in the egress direction.
Options egress—Causes the test to be run in the egress direction of the interface (traffic send
from user-to-network interface (UNI) towards network-to-network interface (NNI)).
ingress—Causes the test to be run in the ingress direction of the interface (traffic sent on
user-to-network interface (UNI)). You cannot configure this option for a bridge family.
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
• RFC 2544-Based Benchmarking Tests Overview on page 1335
• Configuring RFC 2544-Based Benchmarking Tests on page 1341
• rfc2544-benchmarking on page 1698
1485Copyright © 2017, Juniper Networks, Inc.
Chapter 41: Configuration Statements