show route damping
List of Syntax Syntax on page 2995
Syntax (EX Series Switch and QFX Series) on page 2995
Syntax show route damping (decayed | history | suppressed)
<brief | detail | extensive | terse>
<logical-system (all | logical-system-name)>
Syntax (EX Series
Switch and QFX
Series)
show route damping (decayed | history | suppressed)
<brief | detail | extensive | terse>
Release Information Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Command introduced in Junos OS Release 11.3 for the QFX Series.
Command introduced in Junos OS Release 14.1X53-D20 for the OCX Series.
Description Display the BGP routes for which updates might have been reduced because of route
flap damping.
Options brief | detail | extensive | terse—(Optional) Display the specified level of output. If you
do not specify a level of output, the system defaults to brief.
decayed—Display route damping entries that might no longer be valid, but are not
suppressed.
history—Display entries that have already been withdrawn, but have been logged.
logical-system (all | logical-system-name)—(Optional) Perform this operation on all
logical systems or on a particular logical system.
suppressed—Display entries that have been suppressed and are no longer being installed
into the forwarding table or exported by routing protocols.
Required Privilege
Level
view
Related
Documentation
clear bgp damping•
• show policy damping
List of Sample Output show route damping decayed detail on page 2998
show route damping history on page 2999
show route damping history detail on page 2999
Output Fields Table 215 on page 2996 lists the output fields for the show routedamping command. Output
fields are listed in the approximate order in which they appear.
2995Copyright © 2017, Juniper Networks, Inc.
Chapter 42: Operational Commands
To Next Page
Loading...
Need help?
General
