Required Privilege
Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related
Documentation
• Enabling MLD on page 671
• show mld group
• show mld interface
• show mld statistics
• clear mld membership
• clear mld statistics
mode (Chassis Alarm Relay Input and Output)
Syntax mode (close | open);
Hierarchy Level [edit chassis alarm relay input port port-number ]
[edit chassis alarm relay output port port-number ]
Release Information Statement introduced in Junos OS Release 12.3.
Description Configure relay mode in the deactive state—normally closed or normally open.
Options close—Normally closed (NC). Electrical current flows through the contacts when operating
normally. When the current stops flowing, the open alarm is generated.
open—Normally open (NO). Electrical current does not flow through the contacts when
operating normally. When the current flows, the closed alarm is generated.
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
• User-Defined Alarm Relay Overview on page 158
• Alarm Contact Port (Hardware Topic)
• show chassis craft-interface on page 1865
• show chassis alarms on page 1845
1619Copyright © 2017, Juniper Networks, Inc.
Chapter 41: Configuration Statements
To Next Page
Loading...
Need help?
General
