Juniper ACX2000

clock-mode (Chassis Synchronization)
Syntax clock-mode (auto-select | free-run);
Hierarchy Level [edit chassis synchronization ]
Release Information Statement introduced in Junos OS Release 12.2 for ACX Series Routers.
Description Specify the mode of operation to select the clock source either from a free-run local
oscillator or from an external qualified clock.
Default The default setting is auto-select mode
Options auto-select—Select the best clock source.
free-run—Use the free-running local oscillator.
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
• External Clock Synchronization Overview for ACX Series Routers on page 226
• Configuring External Clock Synchronization for ACX Series Routers on page 228
• Synchronous Ethernet Overview
• show chassis synchronization on page 2386
Copyright © 2017, Juniper Networks, Inc.1466
ACX Series Universal Access Router Configuration Guide