Juniper ACX2000

framing (T1 Options for BITS Interfaces)
Syntax framing (esf | sf);
Hierarchy Level [edit chassis synchronization interfaces bits signal-type t1-options]
Release Information Statement introduced in Junos OS Release 12.3 for ACX Series Routers.
Description Configure the framing format for the building-integrated timing supply (BITS) interface
when the signal type is T1 . Valid only when t1 is the signal-type configured at the [edit
chassis synchronization source interfaces interface-name bits signal-type].
Options esf—Extended superframe (ESF) mode for T1 interfaces.
sf—Superframe (SF) mode for T1 interfaces.
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
• External Clock Synchronization Overview for ACX Series Routers on page 226
• Configuring External Clock Synchronization for ACX Series Routers on page 228
• Synchronous Ethernet Overview
• show chassis synchronization on page 2386
full
See brief
Copyright © 2017, Juniper Networks, Inc.1534
ACX Series Universal Access Router Configuration Guide