Juniper ACX2000

timeslots
Syntax timeslots time-slot-range;
Hierarchy Level [edit interfaces interface-name partition partition-number],
[edit interfaces interface-name partition partition-number interface-type type],
Release Information Statement introduced in Junos OS Release 12.2 for the ACX Series Universal Access
Routers.
Description For E1 and T1 interfaces, allocate the specific time slots by number.
Options time-slot-range—Actual time slot numbers allocated.
Range: Ranges vary by interface type as follows:
• 1 through 24 for T1 interfaces (0 is reserved)
• 1 through 31 for E1 interfaces (0 is reserved)
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
• Configuring Fractional E1 Time Slots
• Configuring Fractional T1 Time Slots
timestamp-format (RFC 2544 Benchmarking)
Syntax timestamp-format;
Hierarchy Level [edit services rpm rfc2544-benchmarkingtests test-name test-name]
Release Information Statement introduced in Junos OS Release 12.3X53 for ACX Series routers.
Description Specify the time stamp format.
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
• RFC 2544-Based Benchmarking Tests Overview on page 1335
• Configuring RFC 2544-Based Benchmarking Tests on page 1341
• rfc2544-benchmarking on page 1698
Copyright © 2017, Juniper Networks, Inc.1750
ACX Series Universal Access Router Configuration Guide