Juniper ACX2000

autoinstallation
Syntax autoinstallation {
configuration-servers {
url;
}
interfaces {
interface-name {
bootp;
rarp;
}
}
}
Hierarchy Level [edit system]
Release Information Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.1 for EX Series switches.
Statement introduced in Junos OS Release 12.2 for ACX Series Universal Access Routers.
Description Download a configuration file automatically from an FTP, Hypertext Transfer Protocol
(HTTP), or Trivial FTP (TFTP) server. When you power on a router or switch configured
for autoinstallation, it requests an IP address from a Dynamic Host Configuration Protocol
(DHCP) server. Once the router or switch has an address, it sends a request to a
configuration server and downloads and installs a configuration.
Options The remaining statements are explained separately. See CLI Explorer.
Required Privilege
Level
system—To view this statement in the configuration.
system-control—To add this statement to the configuration.
Related
Documentation
• ACX Series Autoinstallation Overview on page 75
• Before You Begin Autoinstallation on an ACX Series Universal Access Router on page 77
• Autoinstallation Configuration of ACX Series Universal Access Routers on page 78
• USB Autoinstallation on ACX Series Routers on page 80
• Verifying Autoinstallation on ACX Series Universal Access Routers on page 79
• show system autoinstallation status on page 3178
• Upgrading Software by Using Automatic Software Download
• configuration-servers
• idle-timeout
Copyright © 2017, Juniper Networks, Inc.1442
ACX Series Universal Access Router Configuration Guide