Juniper ACX2000

exp exp-classf-core;
}
}
}
CoS configuration at F2:
class-of-service {
interfaces {
ge-1/0/4 {
unit 0 {
forwarding-class be;
}
}
ge-1/0/3 {
classifiers {
dscp dscp-classf-core;
}
rewrite-rules {
dscp dscp-rewrite-core;
}
unit 0 {
rewrite-rules {
exp exp-rewrite-core;
}
}
}
}
system-defaults {
classifiers {
exp exp-classf-core;
}
}
}
Related
Documentation
CoS on ACX Series Universal Access Routers Features Overview on page 864•
• Understanding CoS CLI Configuration Statements on ACX Series Universal Access
Routers on page 865
Classifiers and Rewrite Rules at the Global, Physical and Logical Interface Levels
Overview
On ACX Series Universal Access Routers and EX Series switches, CoS supports
classification and rewrite at the global level and physical interface levels.
At a global level, you can define EXP classification.
At a physical interface level, you can define the following features:
•
DSCP, DSCP-IPV6, and IPv4 precedence classifiers
•
DSCP, DSCP-IPV6, and IPv4 precedence rewrites
871Copyright © 2017, Juniper Networks, Inc.
Chapter 27: Configuring Class of Service