switchover-mode
Syntax switchover-mode (non-revertive | revertive);
Hierarchy Level [edit chassis synchronization ]
Release Information Statement introduced in Junos OS Release 12.2 for ACX Series Routers.
Description Specify whether the system should revert to a higher priority valid source.
Default The default is revertive mode.
Options non-revertive—The system continues to use the current clock source as long as it is valid.
revertive—The the system automatically switches from a lower to a higher quality clock
source whenever the higher clock source becomes available.
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
• quality-level on page 1687
• show chassis synchronization on page 2386
Copyright © 2017, Juniper Networks, Inc.1736
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
Need help?
General
