To Next Page

To Previous Page

ovlan-priority (RFC 2544 Benchmarking)

Syntax ovlan-priority value;

Hierarchy Level [edit services rpm rfc2544-benchmarking tests test-name test-name]

Release Information Statement introduced in Junos OS Release 12.3X53 for ACX Series routers.

Description Configure the priority value for the IEEE 802.1p bit in the outer VLAN tag. This parameter

is valid only for a bridge family for an Ethernet LAN (ELAN) or an Ethernet Line (E-LINE)

service.

Options value—IEEE 802.1p priority value in the outer VLAN tag

Range: 0 through 7

Required Privilege

Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.

Documentation

• RFC 2544-Based Benchmarking Tests Overview on page 1335

• Configuring RFC 2544-Based Benchmarking Tests on page 1341

• rfc2544-benchmarking on page 1698

packet-loss-priority (RFC 2544 Benchmarking)

Syntax packet-loss-priority;

Hierarchy Level [edit services rpm rfc2544-benchmarkingtests test-name test-name]

Release Information Statement introduced in Junos OS Release 12.3X53 for ACX Series routers.

Description Specify the packet loss priority (PLP) value to be used for the test frames generated in

the packet forwarding pipeline. If a value is not configured, then the default value of low

is used.