Juniper ACX2000

rib-group (Routing Options)
Syntax rib-group group-name;
Hierarchy Level [edit logical-systems logical-system-name routing-instances routing-instance-name
routing-options interface-routes],
[edit logical-systems logical-system-name routing-options interface-routes],
[edit logical-systems logical-system-name routing-options rib routing-table-name static],
[edit logical-systems logical-system-name routing-options static],
[edit routing-instances routing-instance-name routing-options interface-routes],
[edit routing-options interface-routes],
[edit routing-options rib routing-table-name static],
[edit routing-options static]
Release Information Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Statement introduced in Junos OS Release 11.3 for the QFX Series.
Statement introduced in Junos OS Release 14.1X53-D20 for the OCX Series.
Description Configure which routing table groups interface routes are imported into.
Options group-name—Name of the routing table group. The name must start with a letter and
can include letters, numbers, and hyphens. It generally does not make sense to
specify more than a single routing table group.
Required Privilege
Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related
Documentation
• Example: Importing Direct and Static Routes Into a Routing Instance
• Example: Exporting Specific Routes from One Routing Table Into Another Routing Table
• interface-routes on page 1574
• rib-groups
1701Copyright © 2017, Juniper Networks, Inc.
Chapter 41: Configuration Statements