You can include this statement at the following hierarchy level:
•
[edit interfaces interface-name unit logical-unit-number family inet address address
vrrp-group group-id]
The range of values is from 100 through 40,950 milliseconds (ms).
Related
Documentation
Understanding VRRP on ACX Series Routers on page 651•
• Configuring Basic VRRP Support on page 653
• Configuring a Backup Router to Preempt the Master Router on page 656
• Modifying the Preemption Hold-Time Value on page 657
• Configuring Asymmetric Hold Time for VRRP Routers on page 657
• Configuring an Interface to Accept Packets Destined for the Virtual IP Address on
page 658
• Example: Configuring VRRP on page 665
• Configuring VRRP for IPv6 on page 667
Configuring a Backup Router to Preempt the Master Router
By default, a higher-priority backup router preempts a lower-priority master router. To
explicitly enable the master router to be preempted, include the preempt statement:
preempt;
You can include this statement at the following hierarchy level:
•
[edit interfaces interface-name unit logical-unit-number family inet address address
vrrp-group group-id]
To prohibit a higher-priority backup router from preempting a lower-priority master router,
include the no-preempt statement:
no-preempt;
Related
Documentation
Understanding VRRP on ACX Series Routers on page 651•
• Configuring Basic VRRP Support on page 653
• Configuring the Advertisement Interval for the VRRP Master Router on page 655
• Modifying the Preemption Hold-Time Value on page 657
• Configuring Asymmetric Hold Time for VRRP Routers on page 657
• Configuring an Interface to Accept Packets Destined for the Virtual IP Address on
page 658
• Example: Configuring VRRP on page 665
• Configuring VRRP for IPv6 on page 667
Copyright © 2017, Juniper Networks, Inc.656
ACX Series Universal Access Router Configuration Guide