vpi (ATM CCC Cell-Relay Promiscuous Mode)
Syntax vpi vpi-identifier;
Hierarchy Level [edit interfaces at-fpc/pic/port atm-options promiscuous-mode]
Release Information Statement introduced before Junos OS Release 7.4.
Junos OS Release 12.2 for the ACX Series Universal Access routers.
Description For ATM interfaces, allow all VCIs in this VPI to open in ATM CCC cell-relay mode.
When you include vpi statements at the [edit interfaces interface-name atm-options
promiscuous-mode] hierarchy level, the specified VPIs open in promiscuous mode.
Options vpi-identifier—ATM virtual path identifier. This is one of the VPIs that you define in the vci
statement. (For a list of hierarchy levels at which you can include the vci statement,
see vci.)
Range: 0 through 255
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
• Configuring ATM Cell-Relay Promiscuous Mode
Copyright © 2017, Juniper Networks, Inc.1776
ACX Series Universal Access Router Configuration Guide