Related
Documentation
Address-Assignment Pools Overview on page 317•
• Configuring an Address-Assignment Pool Name and Addresses on page 319
• Configuring a Named Address Range for Dynamic Address Assignment on page 320
• Configuring Static Address Assignment on page 320
• DHCP Attributes for Address-Assignment Pools on page 321
• Configuring How the Extended DHCP Local Server Determines Which
Address-Assignment Pool to Use on page 322
• Guidelines for Configuring Interface Ranges on page 327
Configuring an Address-Assignment Pool Name and Addresses
To configure an address-assignment pool, you must specify the name of the pool and
configure the addresses for the pool.
To configure an IPv4 address-assignment pool:
1. Configure the name of the pool and specify the IPv4 family.
[edit access]
user@host# edit address-assignment pool pool-name family inet
2. Configure the network address and the prefix length of the addresses in the pool.
[edit access address-assignment pool pool-name family inet]
user@host# set network address
To configure an IPv6 address-assignment pool:
1. Configure the name of the pool and specify the IPv6 family.
[edit access]
user@host# edit address-assignment pool pool-name family inet6
2. Configure the network address and the prefix length of the addresses in the pool.
[edit access address-assignment pool pool-name family inet6]
user@host# set network address
Related
Documentation
Address-Assignment Pools Overview on page 317•
• Configuring Address-Assignment Pools on page 318
• Configuring a Named Address Range for Dynamic Address Assignment on page 320
• Configuring Static Address Assignment on page 320
• DHCP Attributes for Address-Assignment Pools on page 321
• Configuring How the Extended DHCP Local Server Determines Which
Address-Assignment Pool to Use on page 322
319Copyright © 2017, Juniper Networks, Inc.
Chapter 10: Configuring DHCP Client and DHCP Server
To Next Page
Loading...
Need help?
General
