show route all
List of Syntax Syntax on page 2982
Syntax (EX Series Switches) on page 2982
Syntax show route all
<logical-system (all | logical-system-name)>
Syntax (EX Series
Switches)
show route all
Release Information Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Description Display information about all routes in all routing tables, including private, or internal,
tables.
Options none—Display information about all routes in all routing tables, including private, or
internal, tables.
logical-system (all | logical-system-name)—(Optional) Perform this operation on all
logical systems or on a particular logical system.
Required Privilege
Level
view
Related
Documentation
show route brief on page 2989•
• show route detail on page 3000
List of Sample Output show route all on page 2982
Output Fields In Junos OS Release 9.5 and later, only the output fields for the show route all command
display all routing tables, including private, or hidden, routing tables. The output field
table of the show route command does not display entries for private, or hidden, routing
tables in Junos OS Release 9.5 and later.
Sample Output
show route all
The following example displays a snippet of output from the show route command and
then displays the same snippet of output from the show route all command:
user@host> show route
mpls.0: 7 destinations, 7 routes (5 active, 0 holddown, 2 hidden)
Restart Complete
+ = Active Route, - = Last Active, * = Both
0 *[MPLS/0] 2d 02:24:39, metric 1
Copyright © 2017, Juniper Networks, Inc.2982
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
Need help?
General
