show ptp hybrid
Syntax show ptp hybrid
<config | status>
Release Information Command introduced in Junos OS Release 12.2R2.
Description Display the current configuration and current operation mode of the slave.
Options config—Display the PTP source to Synchronous Ethernet interface mappings.
status—Display the current hybrid mode operational status.
Required Privilege
Level
View
Related
Documentation
Understanding Hybrid Mode•
Output Fields Table 210 on page 2943 lists the output fields for the show ptp hybrid command. Output
fields are listed in the approximate order in which they appear.
Table 210: show ptp hybrid Output Fields
Field DescriptionField Name
Displays the IP address of the PTP source.ptp source
Displays the interface name of the Synchronous Ethernet source through which the PTP source is
traceable.
synce source
Displays the current configured mode of the router as Hybrid.Configured Mode
Displays the current operation mode: Hybrid or None.Operating Mode
Displays the IP address and the interface name of the PTP reference clock.PTP Reference
Displays the interface name of the Synchronous Ethernet reference clock.Synchronous Ethernet
Reference
Displays the current lock state of the router: Locked, Initializing, or Acquiring.Lock state
2943Copyright © 2017, Juniper Networks, Inc.
Chapter 42: Operational Commands
To Next Page
Loading...
Need help?
General
