local-ip-address (PTP Slave Clock Source)
Syntax local-ip-address local-ip-address {
asymmetry number;
}
Hierarchy Level [edit protocols ptp slave interface unicast-mode clock-source]
Release Information Statement introduced in Junos OS Release 12.2.
Statement introduced in Junos OS Release 17.3 for the QFX Series.
Description Configure the IP address of the local interface acting as the slave.
NOTE: You must configure the same IP address at the [edit interfaces
interface-name] hierarchy level.
Options local-ip-address—The IP address of the local interface.
The remaining statement is explained separately. See CLI Explorer.
Required Privilege
Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related
Documentation
• IEEE 1588v2 Precision Timing Protocol (PTP) on ACX Series Universal Access Routers
on page 237
• Precision Time Protocol Overview
Copyright © 2017, Juniper Networks, Inc.1588
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
Need help?
General
