inet-precedence (Classifier on Physical Interface)
Syntax inet-precedence (classifier-name | default);
Hierarchy Level [edit class-of-service interfaces interface-name classifiers]
Release Information Statement introduced in Junos OS Release 12.2 for the ACX Series Universal Access
routers.
Description On ACX Series Universal Access routers and EX Series switches, map the inet-precedence
field of the incoming packet to the forwarding class and packet loss priority, based on
the specified inet-precedence classifier. When no classifier is configured on the physical
interface, the default ipprec-compatibility inet-precedence classifier is applied on the
physical interface.
Options classifier-name—Name of the previously defined inet-precedence behavior aggregate
classifier.
default—Default inet-precedence behavior aggregate classifier.
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
inet-precedence (Rewrite Rules on Physical Interface)
Syntax inet-precedence (rewrite-name | default);
Hierarchy Level [edit class-of-service interfaces interface-name rewrite-rules]
Release Information Statement introduced in Junos OS Release 12.2 for the ACX Series Universal Access
routers.
Description Apply a IPv4 precedence rewrite rule.
Options rewrite-name—Name of a rewrite-rules mapping configured at the [edit class-of-service
rewrite-rules inet-precedence] hierarchy level.
default—The default mapping. By default, IP precedence rewrite rules alter the first three
bits on the type of service (ToS) byte while leaving the last three bits unchanged.
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
1563Copyright © 2017, Juniper Networks, Inc.
Chapter 41: Configuration Statements
To Next Page
Loading...
Need help?
General
