Juniper ACX2000

family
Syntax family family {
address address {
destination address;
}
}
Hierarchy Level [edit interfaces interface-name unit logical-unit-number]
Release Information Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 15.1X53-D10 for QFX10000 switches.
Description Configure protocol family information for the logical interface.
Options family—Protocol family:
• ccc—Circuit cross-connect protocol suite
• inet—IP version 4 (IPv4)
• inet6—IP version 6 (IPv6)
• iso—Open Systems Interconnection (OSI) International Organization for Standardization
(ISO) protocol suite
• mlfr-end-to-end—Multilink Frame Relay FRF.15
• mlfr-uni-nni—Multilink Frame Relay FRF.16
• multilink-ppp—Multilink Point-to-Point Protocol
• mpls—MPLS
• tcc—Translational cross-connect protocol suite
• tnp—Trivial Network Protocol
• vpls—Virtual private LAN service
The remaining statements are explained separately. See CLI Explorer.
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
• Link and Multilink Services Interfaces Feature Guide for Routing Devices
• Junos OS Network Interfaces Library for Routing Devices
1515Copyright © 2017, Juniper Networks, Inc.
Chapter 41: Configuration Statements