Juniper ACX2000

domain-vpn-tag
Syntax domain-vpn-tag number;
Hierarchy Level [edit logical-systems logical-system-name routing-instances routing-instance-name protocols
(ospf | ospf3)],
[edit routing-instances routing-instance-name protocols (ospf | ospf3)]
Release Information Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Description Set a virtual private network (VPN) tag for OSPFv2 external routes generated by the
provider edge (PE) routing device.
Options number—VPN tag.
Required Privilege
Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related
Documentation
• Configuring an OSPF Domain ID on page 835
domain-type
Syntax domain-type bridge;
Hierarchy Level [edit bridge-domains bridge-domain-name],
[edit logical-systems logical-system-name routing-instances routing-instance-name
bridge-domains bridge-domain-name],
[edit routing-instances routing-instance-name bridge-domains bridge-domain-name]
Release Information Statement introduced in Junos OS Release 8.4.
Support for logical systems added in Junos OS Release 9.6.
Description (MX Series routers only) Define the type of domain for a Layer 2 bridge domain.
Required Privilege
Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related
Documentation
• Configuring a Bridge Domain
• Configuring a Layer 2 Virtual Switch
1495Copyright © 2017, Juniper Networks, Inc.
Chapter 41: Configuration Statements