Juniper ACX2000

show route forwarding-table
List of Syntax Syntax on page 3045
Syntax (MX Series Routers) on page 3045
Syntax (TX Matrix and TX Matrix Plus Routers) on page 3045
Syntax show route forwarding-table
<detail | extensive | summary>
<all>
<ccc interface-name>
<destination destination-prefix>
<family family | matching matching>
<interface-name interface-name>
<label name>
<matching matching>
<multicast>
<table (default | logical-system-name/routing-instance-name | routing-instance-name)>
<vlan (all | vlan-name)>
<vpn vpn>
Syntax (MX Series
Routers)
show route forwarding-table
<detail | extensive | summary>
<all>
<bridge-domain (all | domain-name)>
<ccc interface-name>
<destination destination-prefix>
<family family | matching matching>
<interface-name interface-name>
<label name>
<learning-vlan-id learning-vlan-id>
<matching matching>
<multicast>
<table (default | logical-system-name/routing-instance-name | routing-instance-name)>
<vlan (all | vlan-name)>
<vpn vpn>
Syntax (TX Matrix and
TX Matrix Plus
Routers)
show route forwarding-table
<detail | extensive | summary>
<all>
<ccc interface-name>
<destination destination-prefix>
<family family | matching matching>
<interface-name interface-name>
<matching matching>
<label name>
<lcc number>
<multicast>
<table routing-instance-name>
<vpn vpn>
Release Information Command introduced before Junos OS Release 7.4.
Option bridge-domain introduced in Junos OS Release 7.5
3045Copyright © 2017, Juniper Networks, Inc.
Chapter 42: Operational Commands