To Next Page

To Previous Page

b. If the two prefixes are numerically equal, the primary contributor is the route that

has the smallest prefix length value.

At this point, the two routes are the same. The primary contributor does not change. An

additional next hop is available for the existing primary contributor.

A rejected contributor still can contribute to less specific generated route. If you do not

specify a policy filter, all candidate routes contribute to a generated route.

Options policy-name—Name of a routing policy.

Required Privilege

Level

routing—To view this statement in the configuration.

routing-control—To add this statement to the configuration.

Documentation

• Example: Summarizing Static Routes Through Route Aggregation

• aggregate on page 1420

• generate on page 1535

port (Alarm Relay Input)

Syntax port port-number {

mode (close | open);

trigger (ignore | red | yellow);

}

Hierarchy Level [edit chassis alarm relay input]

Release Information Statement introduced in Junos OS Release 12.3.

Description Configure the input relay alarm port. Input relay alarm port numbers are 0 through 3.

The remaining statements are explained separately. See CLI Explorer.

Required Privilege

Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.

Documentation

• User-Defined Alarm Relay Overview on page 158

• show chassis craft-interface on page 1865

• show chassis alarms on page 1845

ACX Series Universal Access Router Configuration Guide

Juniper ACX2000 Configuration Guide

Other manuals for Juniper ACX2000