Juniper ACX2000

min-delay-response-interval
Syntax min-delay-response-interval min-delay-response-interval;
Hierarchy Level [edit protocols ptp master]
Release Information Statement introduced in Junos OS Release 12.3 for ACX Series Routers.
Description Configure the minimum log mean interval between delay-response messages. This is a
log
2
value, which means that the minimum delay-response rate allowed is one message
per second.
Options min-delay-response-interval—Minimum acceptable interval between delay-response
messages.
Range: -7 to 4
Default: -7
Required Privilege
Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related
Documentation
• IEEE 1588v2 PTP Boundary Clock Overview on page 234
• Configuring Precision Time Protocol Clocking on page 243
• Configuring a PTP Master Boundary Clock on page 244
• Example: Configuring a PTP Boundary Clock With Unicast Negotiation on page 250
• Example: Configuring a PTP Boundary Clock on page 248
1615Copyright © 2017, Juniper Networks, Inc.
Chapter 41: Configuration Statements