Juniper ACX2000

announce-interval (Master Clock)
Syntax announce-interval announce-interval-value;
Hierarchy Level [edit protocols ptp master]
Release Information Statement introduced in Junos OS Release 12.3 for ACX Series Routers.
Description Configure the logarithmic mean interval for the announce messages to be sent by the
master. This is a log
2
value, which means that announce messages are requested to be
sent every two seconds.
Options announce-interval-value—Announce interval value for announce messages.
Range: 0 through 4
Default: 1
Required Privilege
Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related
Documentation
• IEEE 1588v2 PTP Boundary Clock Overview on page 234
• Configuring Precision Time Protocol Clocking on page 243
• Configuring a PTP Master Boundary Clock on page 244
• Example: Configuring a PTP Boundary Clock With Unicast Negotiation on page 250
• Example: Configuring a PTP Boundary Clock on page 248
Copyright © 2017, Juniper Networks, Inc.1430
ACX Series Universal Access Router Configuration Guide