manual switch
Syntax request protection-group ethernet-ring manual-switch group-name <name> interface-name
<name>
Hierarchy Level [edit protocols protection-group ethernet-ring]
Description Issue manual-switch command on an interface of an Ethernet ring protection group.
When group-name is specified, this command is issued only on the control channel of
that ring instance (specified by interface name). When group name is not specified and
only interface name is given, this command is issued on all the ring instances configured
on that interface. When only logical interface name is provided, this command is issued
only for the ring-instance for which the logical interface is configured as the
control-channel interface.
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
• Ethernet Automatic Protection Switching Overview
Copyright © 2017, Juniper Networks, Inc.1596
ACX Series Universal Access Router Configuration Guide