destination-networks
Syntax destination-networks prefix;
Hierarchy Level [edit logical-systems logical-system-name routing-instances routing-instance-name
routing-options dynamic-tunnels tunnel-name],
[edit logical-systems logical-system-name routing-options dynamic-tunnels tunnel-name
rsvp-te entry],
[edit logical-systems logical-system-name routing-options dynamic-tunnels tunnel-name],
[edit routing-instances routing-instance-name routing-options dynamic-tunnels tunnel-name],
[edit routing-instances routing-instance-name routing-options dynamic-tunnels tunnel-name
rsvp-te entry],
[edit routing-options dynamic-tunnels tunnel-name],
[edit routing-options dynamic-tunnels tunnel-name rsvp-te entry]
Release Information Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 12.3 for ACX Series routers.
Description Specify the IPv4 prefix range for the destination network. Only tunnels within the specified
IPv4 prefix range can be created.
Options prefix—Destination prefix of the network.
Required Privilege
Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related
Documentation
• Configuring GRE Tunnels for Layer 3 VPNs
• Configuring Dynamic Tunnels
• Configuring RSVP Automatic Mesh
Copyright © 2017, Juniper Networks, Inc.1484
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
Need help?
General
