Related
Documentation
CoS on ACX Series Universal Access Routers Features Overview on page 864•
• Understanding CoS CLI Configuration Statements on ACX Series Universal Access
Routers on page 865
• Default IEEE 802.1p Classifier on page 956
Default DSCP and DSCP IPv6 Classifier
Table 59 on page 958 shows the forwarding class and packet loss priority (PLP) that are
assigned to each well-known DSCP when you apply the explicit default DSCP or DSCP
IPv6 classifier. To do this, include the default statement at the [edit class-of-service
interfaces interface-name classifiers (dscp | dscp-ipv6)] hierarchy level:
[edit class-of-service interfaces interface-name classifiers (dscp | dscp-ipv6)]
default;
Table 59: Default DSCP Classifier
PLPForwarding ClassDSCP and DSCP IPv6
lowexpedited-forwardingef
lowassured-forwardingaf11
highassured-forwardingaf12
highassured-forwardingaf13
lowbest-effortaf21
lowbest-effortaf22
lowbest-effortaf23
lowbest-effortaf31
lowbest-effortaf32
lowbest-effortaf33
lowbest-effortaf41
lowbest-effortaf42
lowbest-effortaf43
lowbest-effortbe
lowbest-effortcs1
Copyright © 2017, Juniper Networks, Inc.958
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
Need help?
General
